AQUA modelling paste 100 ml - Fine

Modelling paste for watercolours. Achieves white, relief-like, fine painting grounds on e.g. paper (> 350 g/m²), cardboard or wood. Apply on surfaces with spatula; dries to a water-resistant film which is allowed to be overpainted with water-colours after being dried; the pure modelling paste may also be tinted with tube water-colour or acrylic colour.

Thinner: Water

Handling

Stir – if necessary – before use.
AQUA modelling paste, fine is ready to use and should be applied pure with a pallet knife onto the painting ground. (If coats thicker than 1 cm are required, these should be built in stages!)
Can be overpainted with water-colours after getting completely dry. (The time for drying depends on the thickness of the surface and can last from several minutes up to several hours!)
The pure product may also be tinted with tube water-colour or acrylic colour. (Always use a separate palette for mixing – the product may never be put directly into the pans!)
The product is water mixable, but dries up water-insoluble.
Please clean working tools as soon as possible with water or water and soap.
Please don´t use the product below temperatures under 10 °C object- and room-temperatures.
Close immediately after use.
Store in a cool and dry place.
Protect from frost.
Individual pre-tests are required.

10.20